Study programme 2020-2021 | Français | ||
Manufacturing processes and Metal Alloys | |||
Programme component of Bachelor's in Engineering à la Faculty of Engineering |
Students are asked to consult the ECTS course descriptions for each learning activity (AA) to know what special Covid-19 assessment methods are possibly planned for the end of Q3 |
---|
Code | Type | Head of UE | Department’s contact details | Teacher(s) |
---|---|---|---|---|
UI-B3-IRCIVI-404-M | Compulsory UE | DUCOBU François | F707 - Génie Mécanique |
|
Language of instruction | Language of assessment | HT(*) | HTPE(*) | HTPS(*) | HR(*) | HD(*) | Credits | Weighting | Term |
---|---|---|---|---|---|---|---|---|---|
| Français | 48 | 12 | 0 | 0 | 0 | 5 | 5.00 | 1st term |
AA Code | Teaching Activity (AA) | HT(*) | HTPE(*) | HTPS(*) | HR(*) | HD(*) | Term | Weighting |
---|---|---|---|---|---|---|---|---|
I-GMEC-001 | Manufacturing Processes | 18 | 0 | 0 | 0 | 0 | Q1 | 40.00% |
I-GMEC-101 | Manufacturing Processes - Complements | 14 | 12 | 0 | 0 | 0 | Q1 | 33.33% |
I-META-101 | Metallic Alloys | 16 | 0 | 0 | 0 | 0 | Q1 | 26.67% |
Programme component | ||
---|---|---|
UI-B1-IRCIVI-006-M General Physics | ||
UI-B2-IRCIVI-010-M Thermodynamics | ||
UI-B2-IRCIVI-011-M Introduction to materials |
Objectives of Programme's Learning Outcomes
Learning Outcomes of UE
To establish links between structure and mechanical, physical and chemical properties of the principal metal alloys, justify their practical applications.
Propose and/or justify the use of a heat treatment in order to modify the mechanical properties of the studied metal alloys. Examine a product and determine how it has been manufactured.
Select an appropriate manufacturing process.
Take into account manufacturing constraints (cost, quality, schedule) when designing a product; understand the role of materials in Manufacturing processes and the effect of processes on the mechanical properties of manufactured parts.
Know the specifics of plastics and thermoset composites.
Select an appropriate manufacturing process for plastics or composites according to specifications.
Analyze the advantages and disadvantages associated with additive manufacturing.
Understand the role of materials in manufacturing processes and the effect of processes on the mechanical properties of manufactured parts.
Understand the importance of manufacturing.
The course gives an overview of manufacturing processes of mechanical products in metals, plastics and composite, as well as additive manufacturing, introduces the language of manufacturing and proposes practical lessons. The aim is also to give to the students the necessary information to understand the metallography and the physical metallurgy applied to metal alloys (steels, cast iron, cast and wrought aluminium alloys, titanium alloys). The improvement of the mechanical properties by various heat treatments is also studied.
The course is given by academics who conduct research in the field of manufacturing technology and, in the same time, maintain close links with industrial companies, providing education to the forefront of technological and industrial requirements.
Content of UE
See the AA.
Prior Experience
Fundamentals of physics; fundamentals of materials, technical drawing.
Type of Assessment for UE in Q1
Q1 UE Assessment Comments
I-META-101: Oral/Written examination (100% of the mark), maximum length de 60 min : on all of the material.
The student prepares his written questions then exposes them. The examination includes general questions and secondary questions about a more precise part of the course. It can also include a exercise based on the use of the diagrams studied during the course and bearing on the realization of the various heat treatments.
I-GMEC-001 et I-GMEC-101: Oral examination, 100% of the mark, with a prior written preparation.
The success of the UE is determined by a minimum score of 8/20 for each AA that constitutes it.
Type of Assessment for UE in Q3
Q3 UE Assessment Comments
Same as Q1.
Type of Resit Assessment for UE in Q1 (BAB1)
Q1 UE Resit Assessment Comments (BAB1)
Not applicable
Type of Teaching Activity/Activities
AA | Type of Teaching Activity/Activities |
---|---|
I-GMEC-001 |
|
I-GMEC-101 |
|
I-META-101 |
|
Mode of delivery
AA | Mode of delivery |
---|---|
I-GMEC-001 |
|
I-GMEC-101 |
|
I-META-101 |
|
Required Reading
AA | |
---|---|
I-GMEC-001 | |
I-GMEC-101 | |
I-META-101 |
Required Learning Resources/Tools
AA | Required Learning Resources/Tools |
---|---|
I-GMEC-001 | Course materials (Power Point files, in French, available on Moodle). |
I-GMEC-101 | Course materials (Power Point files, in French, available on Moodle). Laboratory notes (in French, available on Moodle). Safety instructions for laboratories (in French, available on Moodle). |
I-META-101 | Not applicable |
Recommended Reading
AA | |
---|---|
I-GMEC-001 | |
I-GMEC-101 | |
I-META-101 |
Recommended Learning Resources/Tools
AA | Recommended Learning Resources/Tools |
---|---|
I-GMEC-001 | Video library "Manufacturing techniques". |
I-GMEC-101 | Video library "Manufacturing techniques". |
I-META-101 | Lecture notes |
Other Recommended Reading
AA | Other Recommended Reading |
---|---|
I-GMEC-001 | ASM International - ASM Handbooks Volumes 1 to 21 Kalpakjian Serope - Manufacturing Engineering and Technology - Prentice Hall 4th Edition - 2000 Black JT., Kohser R. - DeGarmo's materials & processes in manufacturing - Tenth edition - John Wiley & Sons - 2008 G. Tlusty - Manufacturing processes and equipment - Prentice Hall - 1999. Techniques de l'ingénieur. Marco Santochi, Francesco Giusti - Tecnologia meccanica e studi di fabbricazione - Casa Editrice Ambrosiana - 2005. L. Laperrière, G. Reinhart - CIRP Encyclopedia of Production Engineering - Springer Reference - 2014. |
I-GMEC-101 | ASM International - ASM Handbooks Volumes 1 to 21 Kalpakjian Serope - Manufacturing Engineering and Technology - Prentice Hall 4th Edition - 2000 Black JT., Kohser R. - DeGarmo's materials & processes in manufacturing - Tenth edition - John Wiley & Sons - 2008 G. Tlusty - Manufacturing processes and equipment - Prentice Hall - 1999. Techniques de l'ingénieur. Marco Santochi, Francesco Giusti - Tecnologia meccanica e studi di fabbricazione - Casa Editrice Ambrosiana - 2005. JP Trotignon - Précis des matières plastiques - AFNOR Nathan, 1996. A. Dessarthe - Techniques de fabrication de pièces mécaniques en plastique ou composite. |
I-META-101 | J.-P. Baïlon, J.-M. Dorlot - 2000 - Des Matériaux (3e édition) - Montréal - Presses internationales polytechniques. J. Lecomte-Beckers - Caractéristiques Principales des Alliages d'Aluminium - Chaire aluminium - 1999 - tome 2, pages 17-24. F. Habashi - 1998 - Alloys : Preparation, Properties, Applications - Weinheim - Wiley-VCH G. Béranger, G. Henry, G. Labbe, P. Soulignac - 1997 - Les aciers spéciaux - Paris - Technique et documentation, Edition Lavoisier. A.J. Sedriks - 1996 - Corrosion of Stainless Steels (2nd Edition) - New York - John Wiley & Sons. |
Grade Deferrals of AAs from one year to the next
AA | Grade Deferrals of AAs from one year to the next |
---|---|
I-GMEC-001 | Authorized |
I-GMEC-101 | Authorized |
I-META-101 | Authorized |